Question 1

My bumper looks only scuffed after an impact. Could there be hidden damage?

Accepted Answer

A bumper cover can conceal damaged attachments or components behind it. The outside appearance alone does not establish the extent of an impact. Tell Anthony's Auto Craft where the car was struck and report any new noise, warning or change in how it drives.

Question 2

Why is the airbag warning on after a collision?

Accepted Answer

A warning can indicate a fault affecting the restraint system, even if an airbag did not deploy. Do not erase it or assume the restraints will work normally. Arrange qualified assessment and tell Anthony's Auto Craft the exact warning before planning vehicle delivery.

Question 3

What should I do if my bumper or underbody trim is hanging loose?

Accepted Answer

Loose parts can detach or contact a tire or the road. Stop somewhere safe and do not reach beneath the vehicle in traffic. Describe the loose area to Anthony's Auto Craft and arrange assistance if the vehicle cannot be moved safely.

Question 4

There is a new leak after the collision. Is it safe to drive?

Accepted Answer

The source and severity cannot be established from fluid color alone. Do not continue driving with a substantial leak, fuel smell, smoke or a critical warning. Keep clear of leaking fluids and contact appropriate assistance; advise Anthony's Auto Craft of the leak before delivery.

Question 5

Why are parking-sensor or driver-assistance warnings appearing after impact?

Accepted Answer

Damage or displacement near a sensor or camera can affect its operation, but testing is needed to establish the cause. Do not rely on an affected assistance feature. Give Anthony's Auto Craft the exact warning and impact location so any required inspection or calibration can be considered.

Question 6

Can a dent with intact paint be removed without repainting?

Accepted Answer

Paintless dent removal may be suitable, but paint condition is only one factor. Dent shape, depth, material and access behind the panel also matter. Ask Anthony's Auto Craft to assess it before choosing a repair method.

Question 7

Why is a sharp crease different from a shallow door ding?

Accepted Answer

A sharp crease can involve more concentrated stretching or a difficult panel contour. Size alone does not determine repairability. An assessment by Anthony's Auto Craft can establish whether paintless repair or conventional bodywork is appropriate.

Question 8

The paint is cracked inside a dent. Does that change the repair?

Accepted Answer

Cracked paint means the finish also needs attention; removing the dent alone will not restore the protective coating. Show Anthony's Auto Craft the damaged finish so the panel and paint work can be assessed together.

Question 9

Why is a dent near an edge or body line harder to assess?

Accepted Answer

Panel contours, reinforcement and access can affect how a dent can be repaired. A photo may not show the panel construction or depth clearly. Anthony's Auto Craft can examine the area and explain the appropriate options.

Question 10

Should I use a suction tool or heat to remove a dent myself?

Accepted Answer

An unsuitable method can stretch the panel or damage the finish and make later repair more involved. Avoid experimenting on damaged paint, complex contours or unfamiliar panel materials. Have Anthony's Auto Craft assess the dent first.

Question 11

How can I tell whether a scratch needs more than polishing?

Accepted Answer

A surface mark and a scratch through the coating can require different work, and appearance alone can be misleading. Avoid aggressive rubbing compounds while the damage is unassessed. Anthony's Auto Craft can inspect the finish and discuss a suitable repair.

Question 12

A paint chip has exposed the material underneath. What should I do?

Accepted Answer

Have the damaged coating assessed before the exposed area deteriorates further. Avoid scraping or applying an unverified product that could complicate refinishing. Point out the chip and any discoloration to Anthony's Auto Craft.

Question 13

Why does the damaged or repaired area look different in sunlight?

Accepted Answer

Lighting, finish texture, color variation and the viewing angle can change how a panel appears. A photograph does not always show the difference accurately. Ask Anthony's Auto Craft to examine the area under suitable lighting before deciding what correction is needed.

Question 14

Why is clear coating peeling or flaking?

Accepted Answer

Peeling can involve coating deterioration or an adhesion problem; it is not automatically a defect in the metal underneath. Polishing cannot restore missing coating. Anthony's Auto Craft can assess the affected area and the refinishing work it needs.

Question 15

What can cause bubbles or discoloration around damaged paint?

Accepted Answer

A coating problem or deterioration beneath the surface can change the finish. The visible mark does not reveal the full condition underneath. Avoid covering it with touch-up paint before Anthony's Auto Craft has assessed the area.

Question 16

My door will not latch properly after an accident. What should I do?

Accepted Answer

Do not drive with a door that cannot close and latch securely. A displaced panel, hinge or latch area may be involved, but the cause needs inspection. Avoid slamming it repeatedly and discuss safe transport with Anthony's Auto Craft.

Question 17

Why are the gaps around my hood or trunk uneven after impact?

Accepted Answer

Changed gaps can indicate displaced panels or damage to supporting areas. Adjusting the visible panel without assessment can miss underlying problems. Show Anthony's Auto Craft where the fit changed, and do not drive if the hood cannot latch securely.

Question 18

Why is there new wind noise after body damage?

Accepted Answer

A change in panel fit, a disturbed seal or trim damage can allow air through. Note which area the sound comes from without trying to investigate while driving. Those details help Anthony's Auto Craft assess the affected body and sealing surfaces.

Question 19

Why is rainwater entering around a door or trunk after a collision?

Accepted Answer

A displaced seal, damaged seam or changed panel fit can allow water into the vehicle. Record where it appears and protect belongings without blocking drains or sealing over the area. Arrange an assessment with Anthony's Auto Craft rather than assuming the seal alone is responsible.

Question 20

My door or trunk rubs another panel when opening. Should I keep using it?

Accepted Answer

Repeated movement can damage the finish or worsen a fit problem. Do not force a panel that binds or catches. Tell Anthony's Auto Craft where the contact occurs so the panel, attachments and surrounding structure can be assessed.

Question 21

A crack in my windshield is spreading. What should I do?

Accepted Answer

Arrange a glass assessment promptly. If the crack obstructs your view or the glass appears unstable, avoid driving and arrange assistance. Tell Anthony's Auto Craft the crack location and vehicle details; do not assume a small original chip means the damage is still minor.

Question 22

What should I do after a side window shatters?

Accepted Answer

Keep people away from loose glass and avoid operating the window mechanism. Arrange safe protection and transport as needed. Contact Anthony's Auto Craft about replacement and mention whether the damage followed a collision or affected the door.

Question 23

Why does the view through my windshield look distorted?

Accepted Answer

Damage, surface condition or a glass issue may affect visibility. Do not rely on a distorted area for a clear view of traffic. Describe the location and when it is noticeable to Anthony's Auto Craft so the glass can be assessed.

Question 24

Why is there whistling or water near recently damaged glass?

Accepted Answer

A damaged seal, trim or surrounding body area can create a gap. The glass and its mounting area need to be evaluated together. Anthony's Auto Craft can discuss an assessment; do not mask the problem with a permanent sealant before inspection.

Question 25

A camera warning appeared after windshield damage. Could it be related?

Accepted Answer

A camera near the windshield may be affected by damage or changes around its viewing area. A warning does not identify the fault by itself. Tell Anthony's Auto Craft about it when discussing glass replacement, and confirm the manufacturer-required checks for your vehicle.

Question 26

Why is there a new vibration after striking a curb?

Accepted Answer

A wheel, tire or another impact-affected component may be damaged. Stop driving if the vibration is strong or control feels uncertain. Explain the impact to Anthony's Auto Craft; a cosmetic wheel repair alone may not address the underlying problem.

Question 27

My tire is losing pressure after a wheel impact. What should I do?

Accepted Answer

A tire, valve or wheel may be damaged. Do not continue on a flat or visibly damaged tire, and do not assume adding air makes it safe. Arrange assistance and discuss the wheel damage with Anthony's Auto Craft.

Question 28

Is curb rash only a cosmetic problem?

Accepted Answer

Some scraping affects the finish, but an impact can also damage the wheel or tire. Tell Anthony's Auto Craft if there is air loss, vibration or a change in steering so the concern is not treated as appearance alone.

Question 29

Can a visibly cracked or bent wheel be repaired?

Accepted Answer

Repairability depends on the damage, wheel construction and manufacturer restrictions. Avoid driving on a suspect wheel until it has been assessed. Anthony's Auto Craft can discuss the available options; do not assume every damaged wheel is suitable for repair.

Question 30

Why does my vehicle pull to one side after an impact?

Accepted Answer

Tire, wheel, steering, suspension or structural damage may affect how it tracks. Avoid testing it at speed. If control is affected, stop safely and arrange transport; describe the change to Anthony's Auto Craft so the collision assessment includes it.

Question 31

My Tesla struck something underneath. Can I keep driving?

Accepted Answer

Underbody impact can involve areas near high-voltage components. Avoid inspecting beneath the car yourself. Follow vehicle warnings and arrange qualified assessment; tell Anthony's Auto Craft exactly where the impact occurred before moving the vehicle.

Question 32

What should I do if a damaged electric vehicle smokes or hisses?

Accepted Answer

Move away, keep others clear and call emergency services. Do not touch exposed components or attempt to fight a battery fire. Once emergency responders have made arrangements, inform Anthony's Auto Craft before any delivery.

Question 33

Should I charge an electric vehicle after a collision?

Accepted Answer

Do not charge a vehicle with suspected battery or charging-system damage until qualified personnel establish it is safe. Follow manufacturer instructions and disclose the collision to Anthony's Auto Craft before arranging repair intake.

Question 34

My Tesla will not power up after impact. Should I try to reset it?

Accepted Answer

Do not bypass warnings or attempt work on high-voltage components. Arrange manufacturer-appropriate assistance and tell Anthony's Auto Craft what the vehicle displayed; a qualified assessment is needed before further operation.

Question 35

Does a collision-damaged electric vehicle need special towing arrangements?

Accepted Answer

Yes. Tell the recovery provider the exact model and damage, and follow its manufacturer transport procedure. Damaged high-voltage systems need special handling. Confirm safe receiving arrangements with Anthony's Auto Craft before transport.

Vehicle troubleshooting guide

Collision Damage and Structural Concerns

Dents and Creases

Paint Chips, Scratches and Finish Changes

Doors, Panel Gaps and Water Leaks

Damaged Glass and Visibility

Wheel Damage and Changes After an Impact

Tesla and Electric-Vehicle Collision Concerns

Still have a question?